[ previous ] [ next ] [ threads ]
 
 From:  =?UTF-8?Q?Peter_Parni=C4=8Dan?= <peter at procad dot sk>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] NAT bug - reaching LAN AP from internet
 Date:  Tue, 23 Aug 2005 11:24:02 +0200
..i put there Server address my WAN Ip address and its work...so now its 
looks like im in my home network but dont know how to reach my LAN AP... Im 
in the office 1.1.1.0 subnet, at home is 192.168.100.0... ...so should i use 
192.168.100.0 address for reaching AP? If yes i have somethings wrong....

TIA, peter

----- Original Message ----- 
From: "Peter Parničan" <peter at procad dot sk>
To: "Kerem Erciyes" <k underscore erciyes at zegnaermenegildo dot it>; 
<m0n0wall at lists dot m0n0 dot ch>; "Chris Buechler" <cbuechler at gmail dot com>
Sent: Tuesday, August 23, 2005 10:39 AM
Subject: Re: [m0n0wall] NAT bug - reaching LAN AP from internet


Hi, i have played with PPTP but i need small support.
In XP i have VPN connection.
In mono I have created VPN: PPTP user with name and password, than enabled
PPTP

And here is my problem: i dont know what IP address should i type there...

Server address ??? -- shoulde be there LAN Ip address of my mono? ...it
doesnt work, i get some error messages.
Remote address range: i put there 192.168.100.96 because im trying to conect
to my LAN AP: 192.168.100.100.

...for test i put to server address ip which is 192.168.100.2 (is not used
in my network) ...after this i tryed use XP VPN, when i get window with name
and passw. i just filled and conection is established. But its not working,
probably of bad Server IP.

Pls. for short help.

Thx. Pet.

----- Original Message ----- 
From: "Kerem Erciyes" <k underscore erciyes at zegnaermenegildo dot it>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Thursday, August 18, 2005 12:16 PM
Subject: Re: [m0n0wall] NAT bug - reaching LAN AP from internet


On 8/17/05, Peter Parničan <peter at procad dot sk> wrote:

>>Hi Kerem,
>>pls. could u send more info about your settings (or just few steps how to
>>set up..).
>>Im really interested in this solution.
>>
>>
>>
Hi Peter,

1. Enter VPN -> PPTP on m0n0wall
2. enable pptp
3. enter server LAN address
4. enter LAN address range
5. save

on windows

enter new connection wizard

1. enter wan ip
2. username & password

should do the trick..

Kerem


---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch



---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch