[ previous ] [ next ] [ threads ]
 
 From:  Chris Buechler <cbuechler at gmail dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Bridging - can't ping
 Date:  Fri, 2 Sep 2005 14:48:23 -0400
On 9/1/05, Steve Yates <steve at teamits dot com> wrote:
> My setup, with 1.2b9:
> 
> WAN - 10.0.0.0/24 (WAN has IP 10.0.0.3, gateway 10.0.0.1)
> OPT1 - bridged to WAN (PCs have 10.0.0.0/24)
> LAN - 192.168.1.0/24 (not connected to either WAN or OPT1)
> 
> WAN and OPT1 are bridged, with filtering of bridged packets enabled.
> From m0n0wall, if I...
> 
> ping 10.0.0.1 (located on WAN) - "no route to host"
> ping 10.0.0.2 (located on OPT1) -  3 success plus ~10 random "duplicates"
> ping any Internet IP (located on WAN) - "no route to host"
> 

you have the OPT1 interface plugged into the same broadcast domain as
the WAN?  Seems you have a network loop going on, which that would
cause.

-Chris