---------- Forwarded message ----------
From: Robo.K. <mono at inmail dot sk>
Date: Sep 16, 2005 9:38 AM
Subject: RE: [m0n0wall] Traffic per IP
To: don dot munyak at gmail dot com


 Can you please describe step by step how to setup enviroment with
wallwatcher to collecr IP statistic?
Thanx.
Bob.

-------------------------------------------------------------------------

I don't know about step by step, but here's what I did.

I downloaded the wallwatcher program and installed to a windows machine.
This windows machine needs to have a fixed lan IP
Read any documentation for wallwatcher
Enable wallwatcher to start, everytime you reboot the windows machine.
If you are planning on using Window-XP with the built-in firewall,
make sure you allow inbound traffic for 514, or exceptions for the
wallwatcher program.

In the m0n0wall GUI Service>SNMP, enable the snmp agent
In the m0n0wall GUI Diagnostics>Logs>settings tab,
-Save

- Check(enable) : Show log entries in reverse order (newest entries on top)
- Check(enable) : Log packets blocked by the default rule
- Enable syslog'ing to remote syslog server
- Enter the IP address for the windows machine
- Check(enable) the different events you want to log.
- Save

Even without reading any doc's, after you make these setting changes,
all event logging should now start to go to the windows machine. You
will still have a brief logging on m0n0wall.

As for looking at bandwidth statistics, this is something you will
need to read up on from the help file in wallwatcher.

WallWatcher will now also function as a remote syslog server.

- Don