I have the lex-light with the same board and have had no problems. If I recall
there is a sepcial way the jumpers need to be set to make the CF master boot.
They are documented in the manual for the lex...

Chet Harvey
Pitbull Technologies <http://www.pittech.com/> 
Protecting your Digital Assets



Quoting Gaurav Sharma <gaurav at interacesso dot pt>:

> Hello Everyone,
> 
> I am trying get M0n0wall to work on a LEX Neo with the following board 
> (CV860A).  I want to boot m0n0wall from a CF card.  The CF card adapter 
> on this hardware uses the secondary IDE channel and is the master.   I 
> was able to boot a Debian ISO image from a CF card  connected to the USB 
> port and install it on another card inside the CF adapter. 
> 
> Now when I put the generic pc image on a CF care and try to boot the 
> hardware I get a 'boot error' message. I understand that it might be a 
> problem with the CF card adapter being the secondary master.  I know 
> that some people have gotten M0n0wall to work on this hardware so if you 
> can point me in the right direction about how to get this working I will 
> be really grateful. 
> 
> Thanks,
> Gaurav.
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
>