What you see in the firewall log at the moment, when you try to access LAN
via PPTP?

----- Original Message ----- 
From: "Lee Sharp" <leesharp at hal dash pc dot org>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Tuesday, September 20, 2005 4:19 AM
Subject: [m0n0wall] Cannot see LAN subnet via PPTP


>
> I know this is a simple mistake somewhere, but I can not find it
> anywhere.  I can establish a PPTP tunnel via WinXP to a given box.  I
> can then browse the internet from said box via the tunnel.
> (www.myipaddress.com confirms this)  I can ping the LAN interface of
> the m0n0wall box.  I can not ping anything else (or web or whatever)
> on the LAN subnet. I have tried an ip address range for the PPTP that
> is both within the LAN range, and outside the LAN range with the same
> result. The rules in the firewall are;
> WAN interface
>    Proto Source Port Destination Port Description
>    TCP  *  *  69.x.x.130  443 (HTTPS)  Allow Remote Admin
> PPTP clients
>    Proto Source Port Destination Port Description
>    *  *  *  *  *  Default PPTP -> any
> LAN interface
>    Proto Source Port Destination Port Description
>    *  LAN net  *  *  *  Default LAN -> any
>
> LAN IP 192.168.10.0/24
> PPTP Server 192.168.10.239
> PPTP Clients 192.168.10.240/28
>
> Any hints?  What simple thing am I missing? Thanks.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>