[ previous ] [ next ] [ threads ]
 
 From:  "Chad R. Larson" <clarson at eldocomp dot com>
 To:  "Ryan A. Mullins" <pseudo at dotvoid dot org>, "Ryan A. Mullins" <pseudo at dotvoid dot org>, "m0n0wall at lists dot m0n0 dot ch" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] 4801 kernel file
 Date:  Thu, 1 Jan 2004 15:58:34 -0700
At 03:54 PM 1/1/2004, Chad R. Larson wrote:
>Buggers.  The infamous attachment stripper got me.  Here's inline (I hope).

See what you get for trying to help?  Here's a cut-n-paste.  You'll have to 
extract it with your own editor...

---------------------( cut here ) -----------

machine         i386
cpu                     I586_CPU
ident           M0N0WALL_NET48XX
maxusers        0
options         INCLUDE_CONFIG_FILE

#makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug symbols

options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         FAST_IPSEC
options         IPSEC_FILTERGIF
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_DIRHASH             #Improve performance on big directories
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         _KPOSIX_PRIORITY_SCHEDULING
options         ICMP_BANDLIM            #Rate limit bad replies

options         IPFILTER
options         IPFILTER_LOG
options         IPFILTER_DEFAULT_BLOCK

options         BRIDGE

options         NO_SWAPPING

device          isa
device          eisa
device          pci

# ATA and ATAPI devices
device          ata0    at isa? port IO_WD1 irq 14
device          ata1    at isa? port IO_WD2 irq 15
device          ata
device          atadisk                 # ATA disk drives
options         ATA_STATIC_ID           #Static device numbering

# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device          apm0    at nexus? disable flags 0x20 # Advanced Power 
Management

# Serial (COM) ports
device          sio0    at isa? port IO_COM1 flags 0x30 irq 4
device          sio1    at isa? port IO_COM2 irq 3
device          sio2    at isa? disable port IO_COM3 irq 5
device          sio3    at isa? disable port IO_COM4 irq 9

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
device          sis             # Silicon Integrated Systems SiS 900/SiS 7016

# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device          wi

# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device          an

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   sl      1       # Kernel SLIP
pseudo-device   ppp     1       # Kernel PPP
pseudo-device   tun             # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   gif             # IPv6 and IPv4 tunneling
pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf             #Berkeley packet filter

options         NETGRAPH                #netgraph(4) system
options         NETGRAPH_ASYNC
options         NETGRAPH_BPF
options         NETGRAPH_BRIDGE
options         NETGRAPH_CISCO
options         NETGRAPH_ECHO
options         NETGRAPH_ETHER
options         NETGRAPH_FRAME_RELAY
options         NETGRAPH_HOLE
options         NETGRAPH_IFACE
options         NETGRAPH_KSOCKET
options         NETGRAPH_L2TP
options         NETGRAPH_LMI
# MPPC compression requires proprietary files (not included)
#options        NETGRAPH_MPPC_COMPRESSION
options         NETGRAPH_MPPC_ENCRYPTION
options         NETGRAPH_ONE2MANY
options         NETGRAPH_PPP
options         NETGRAPH_PPPOE
options         NETGRAPH_PPTPGRE
options         NETGRAPH_RFC1490
options         NETGRAPH_SOCKET
options         NETGRAPH_TEE
options         NETGRAPH_TTY
options         NETGRAPH_UI
options         NETGRAPH_VJC

pseudo-device   crypto
pseudo-device   cryptodev
device                  hifn

# USB support
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
# USB Ethernet, requires mii
device          aue             # ADMtek USB ethernet
device          cue             # CATC USB ethernet
device          kue             # Kawasaki LSI USB ethernet
---------------------------------------------


         -crl
--
Chad R. Larson (CRL22)    chad at eldocomp dot com
   Eldorado Computing, Inc.   602-604-3100
      5353 North 16th Street, Suite 400
        Phoenix, Arizona   85016-3228

-- CONFIDENTIALITY NOTICE --

This message is intended for the sole use of the individual and entity to whom it is addressed, and
may contain information that is privileged, confidential and exempt from disclosure under applicable
law. If you are not the intended addressee, nor authorized to receive for the intended addressee,
you are hereby notified that you may not use, copy, disclose or distribute to anyone the message or
any information contained in the message. If you have received this message in error, please
immediately advise the sender by reply email, and delete the message. Thank you.