[ previous ] [ next ] [ threads ]
 
 From:  "Junior Gillespie" <jgillespie at t dash speed dot com>
 To:  "Jonathan De Graeve" <Jonathan dot De dot Graeve at imelda dot be>
 Cc:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] First release of new Radius system
 Date:  Wed, 21 Sep 2005 11:57:02 -0500
Same problem.

FATAL ERROR

Junior 
-----Original Message-----
From: Jonathan De Graeve [mailto:Jonathan dot De dot Graeve at imelda dot be] 
Sent: Wednesday, September 21, 2005 10:53 AM
To: Junior Gillespie
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: RE: [m0n0wall] First release of new Radius system

That's possible, i lately saw that my own config was still present and
changed it in a hurry without checking

I know uploaded a new image that does work ;)

http://inf.imelda.be/downloads/generic-pc-radius2_20050921_17-46.img


Sorry for the trouble

J.

-- 
Jonathan De Graeve
Network/System Administrator
Imelda vzw
Informatica Dienst
015/50.52.98
jonathan dot de dot graeve at imelda dot be

---------
Always read the manual for the correct way to do things because the
number of incorrect ways to do things is almost infinite
---------

-----Oorspronkelijk bericht-----
Van: Junior Gillespie [mailto:jgillespie at t dash speed dot com] 
Verzonden: woensdag 21 september 2005 17:43
Aan: Jonathan De Graeve
CC: m0n0wall at lists dot m0n0 dot ch
Onderwerp: RE: [m0n0wall] First release of new Radius system

You may want to look over the image again.

FATAL ERROR

The device that contains the configuration file (config.xml) could not
be   
found. m0n0wall cannot continue booting.



Junior 
-----Original Message-----
From: Jonathan De Graeve [mailto:Jonathan dot De dot Graeve at imelda dot be] 
Sent: Wednesday, September 21, 2005 10:15 AM
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] First release of new Radius system

Currently only authentication is fully done by this new framework

http://inf.imelda.be/downloads/generic-pc-radius2_20050921_16-01.img


In the error message on the captive portal you can place a
$PORTAL_REPLY_MESSAGE$ tag in the uploaded HTML file which when replied
by the server will be replaced by the Radius Reply-Message the server
give.

Also when an error or expired radius login appears the system will log
this to the captive portal log.

This image is built upon the WD image with element manager support etc.

Open VPN enhancements done by Peter aren't included yet.

Enjoy...

J.

-- 
Jonathan De Graeve
Network/System Administrator
Imelda vzw
Informatica Dienst
015/50.52.98
jonathan dot de dot graeve at imelda dot be

---------
Always read the manual for the correct way to do things because the
number of incorrect ways to do things is almost infinite
---------



---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch


-- 
This message has been scanned for viruses and dangerous content by The
MailScanner at T-Speed Broadband Communications Inc., www.t-speed.com,
and is believed to be clean.






-- 
This message has been scanned for viruses and dangerous content by The
MailScanner at T-Speed Broadband Communications Inc., www.t-speed.com,
and is believed to be clean.