[ previous ] [ next ] [ threads ]
 
 From:  Chris Buechler <cbuechler at gmail dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Problem with 1.2b10: PPPoE causes router to stop responding
 Date:  Thu, 29 Sep 2005 16:33:55 -0400
On 9/29/05, Frank Zavelberg <fz at tianet135 dot ath dot cx> wrote:
> Hello!
>
>
> I just found out about the m0n0wall project and am trying the latest
> version 1.2b10. I'm using an old K6/2-300 with 64 MB RAM and a 64 MB
> compact flash card. As NICs I have two old RTL8139 based network cards
> in the PC.
>
> Installation went all okay.
>
> But as soon as after a fresh install I set the WAN mode to PPPoE in
> the web config, the router stops responding. It would seem as if its
> packet filter is blocking packets from my work PC, since the monowall
> PC itself is still running fine, and when I do a ping test from MWs
> console, it's working nicely too.
>

 are you connecting to it over the WAN side?

-Chris