Man, that diagram did NOT come out like I had hoped it would. But you
get the idea.

Jason

Jason King wrote:

> Here is an interesting scenario for the list. I have a remote user
> that needs to connect to our home offices via IPSec VPN. We can get
> the tunnel working just fine and the endpoint lands in the LAN section
> of the network. Well, we have a DMZ segment that she also needs to
> have access to and with the current VPN settings, she is unable to
> connect to it.
>
> Like so:
>
>          Home PC (192.168.37.100)
>                |
>                |
> Linksys VPN Router(192.168.37.1)
>                |                \
>                |V               \
>                |P            Internet
>                |N           /
>                |            /              m0n0wall
>          /            \
>        /                \
> LAN               DMZ
> (192.168.1.1)    (10.0.0.1)
> She routes perfectly to the LAN segment, but she is unable to route to
> the DMZ.  A tracert shows that the packet destined for my DMZ is
> routing itself out to the internet instead of down the VPN tunnel. I
> have added a static route to the linksys but it is still trying to
> route out to the internet. Any other ideas?
>
> Jason
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>