[ previous ] [ next ] [ threads ]
 
 From:  "Andrew Cotter" <andrew dot cotter at somersetcapital dot com>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Trouble Connecting to XO T1
 Date:  Tue, 18 Oct 2005 09:26:09 -0400
> -----Original Message-----
> From: jcassel at softwaresedge dot com [mailto:jcassel at softwaresedge dot com]
> Sent: Tuesday, October 18, 2005 9:13 AM
> To: m0n0wall at lists dot m0n0 dot ch
> Subject: [m0n0wall] Trouble Connecting to XO T1
>
>
> I am trying to replace a generic netgear router with a m0n0wall
> [Net4501]. I
> have install this same setup in several other locations with no
> issues. Only
> thing that is different is the at this is a T1 from XO and not a
> DSL or Cable
> connection. I can't seem to get the network interface on the
> M0n0wall to light
> up. I also tried to connect using a crossover with no success. I
> am baffled as
> to what the issue could be. This connection works if I use the
> Netgear router.
>
> I can connect the M0nowall to the internal(lan side of the router) with no
> issues. It works fine. I know it is a physical connection issue
> because when
> connected to the lan or a cable modem it works like expected.
>
> Has anyone seen this before? Can you give me some direction. I
> looked on the
> list archive and found no direct references.
>
> I really need a little advice here I'm starting to get some bad
> internal press
> on the M0n0wall/real firewall issue.
>
> John
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>

Are you trying to plug the T1 into a regular ethernet card or is there some
sort of router in front of your m0n0wall box?

Andrew