I am trying to connect directly to the incoming T1. Currently the 
netgear device
is connected in this way.

John

Quoting Andrew Cotter <andrew dot cotter at somersetcapital dot com>:

>> -----Original Message-----
>> From: jcassel at softwaresedge dot com [mailto:jcassel at softwaresedge dot com]
>> Sent: Tuesday, October 18, 2005 9:13 AM
>> To: m0n0wall at lists dot m0n0 dot ch
>> Subject: [m0n0wall] Trouble Connecting to XO T1
>>
>>
>> I am trying to replace a generic netgear router with a m0n0wall
>> [Net4501]. I
>> have install this same setup in several other locations with no
>> issues. Only
>> thing that is different is the at this is a T1 from XO and not a
>> DSL or Cable
>> connection. I can't seem to get the network interface on the
>> M0n0wall to light
>> up. I also tried to connect using a crossover with no success. I
>> am baffled as
>> to what the issue could be. This connection works if I use the
>> Netgear router.
>>
>> I can connect the M0nowall to the internal(lan side of the router) with no
>> issues. It works fine. I know it is a physical connection issue
>> because when
>> connected to the lan or a cable modem it works like expected.
>>
>> Has anyone seen this before? Can you give me some direction. I
>> looked on the
>> list archive and found no direct references.
>>
>> I really need a little advice here I'm starting to get some bad
>> internal press
>> on the M0n0wall/real firewall issue.
>>
>> John
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>>
>
> Are you trying to plug the T1 into a regular ethernet card or is there some
> sort of router in front of your m0n0wall box?
>
> Andrew
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch