[ previous ] [ next ] [ threads ]
 
 From:  Peter Heywood <Peter at iwebsl dot com>
 To:  "m0n0wall at lists dot m0n0 dot ch" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] NT4 networking and m0n0
 Date:  Tue, 18 Oct 2005 13:51:38 -0400
> In other words your DMZ/LAN seperation will be poor if you need NT4
> domain
> traffic to pass.

That is what I was afraid of.

I don't use FP, exchange, printing services etc. So either I get safety or convenience. At present
the servers can't login to the domain and asides from the errors in the logs they appear to be
working so I'll go with safety.

Thanks


>
> A workgroup might be the answer unless you use NT Authentication on
> your web
> (e.g. for Frontpage) or you use Exchange for email.
>
> Regards,
>
> Kris.
>
> ----- Original Message -----
> From: "Peter Heywood" <Peter at iwebsl dot com>
> To: <m0n0wall at lists dot m0n0 dot ch>
> Sent: Tuesday, October 18, 2005 4:03 PM
> Subject: [m0n0wall] NT4 networking and m0n0
>
>
> My setup:
>
> WAN -> M0n0 -> LAN (PDC with Wins)
> -> DMZ (web and mail servers)
>
> I recently added the DMZ and moved my servers (web and mail) to the
> DMZ. I'm
> still using an old NT4 PDC and domain which the servers were part
> of.
> Viewing the system logs I see the server are no longer logging into
> the
> domain. My Questions are; should I move the servers off the domain
> and setup
> a workgroup or is there a better way to be doing this.
>
> Peter
>
>
> --------------------------------------------------------------------
> -
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
> --------------------------------------------------------------------
> -
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch