[ previous ] [ next ] [ threads ]
 
 From:  Ethan Bonick <ethan at networkinggeeks dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Trouble Connecting to XO T1
 Date:  Tue, 18 Oct 2005 09:07:24 -0500
Looking back at your orignal post the netgear is a router/firewall? What 
is the model number of your netgear device?

Ethan

jcassel at softwaresedge dot com wrote:
> I am trying to connect directly to the incoming T1. Currently the 
> netgear device
> is connected in this way.
>
> John
>
> Quoting Andrew Cotter <andrew dot cotter at somersetcapital dot com>:
>
>>> -----Original Message-----
>>> From: jcassel at softwaresedge dot com [mailto:jcassel at softwaresedge dot com]
>>> Sent: Tuesday, October 18, 2005 9:13 AM
>>> To: m0n0wall at lists dot m0n0 dot ch
>>> Subject: [m0n0wall] Trouble Connecting to XO T1
>>>
>>>
>>> I am trying to replace a generic netgear router with a m0n0wall
>>> [Net4501]. I
>>> have install this same setup in several other locations with no
>>> issues. Only
>>> thing that is different is the at this is a T1 from XO and not a
>>> DSL or Cable
>>> connection. I can't seem to get the network interface on the
>>> M0n0wall to light
>>> up. I also tried to connect using a crossover with no success. I
>>> am baffled as
>>> to what the issue could be. This connection works if I use the
>>> Netgear router.
>>>
>>> I can connect the M0nowall to the internal(lan side of the router) 
>>> with no
>>> issues. It works fine. I know it is a physical connection issue
>>> because when
>>> connected to the lan or a cable modem it works like expected.
>>>
>>> Has anyone seen this before? Can you give me some direction. I
>>> looked on the
>>> list archive and found no direct references.
>>>
>>> I really need a little advice here I'm starting to get some bad
>>> internal press
>>> on the M0n0wall/real firewall issue.
>>>
>>> John
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>>> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>>>
>>
>> Are you trying to plug the T1 into a regular ethernet card or is 
>> there some
>> sort of router in front of your m0n0wall box?
>>
>> Andrew
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>