[ previous ] [ next ] [ threads ]
 
 From:  YARICK <yarick at yarick dot com>
 To:  sai <sonicsai at gmail dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: Optimization for VOIP
 Date:  Fri, 21 Oct 2005 12:47:53 -0400
Sai, I do not have a Vonage device, and connect to Vonage via SIP.


On 10/21/05, sai <sonicsai at gmail dot com> wrote:
>
> [1] "outgoing Interface WAN Proto any Source any Dest 216.115.25.198<http://216.115.25.198>
> " should be
> "outgoing Interface WAN Proto any Source 216.115.25.198<http://216.115.25.198>Dest any "
> assuming that the 216 ip address is your vonage phone. Same goes for
> the Broadvoice rule.
> [2] The first 4 rules are not needed because of the rules labeled
> 'Vonage' and 'Broadvoice'. In any case they will not match any packets
> - see next point.
>
> [3] "Interface Wan Proto any Source port 20001-65535 Dest port
> 20001-65535" will match a packet coming in on the WAN interface that
> has source port of 20001-65535 AND destination port of 20001-65535.
> This is unlikely to happen.
> Just specify the destination ports and leave source as 'any' that should
> work.
>
> sai
>