SAI, here is updated Traffic Shaping rules:
On 10/21/05, YARICK <yarick at yarick dot com> wrote:
> Sai, I do not have a Vonage device, and connect to Vonage via SIP.
> On 10/21/05, sai <sonicsai at gmail dot com> wrote:
> >  "outgoing Interface WAN Proto any Source any Dest 220.127.116.11<http://18.104.22.168>
> > " should be
> > "outgoing Interface WAN Proto any Source 22.214.171.124
> > <http://126.96.36.199> Dest any "
> > assuming that the 216 ip address is your vonage phone. Same goes for
> > the Broadvoice rule.
> >  The first 4 rules are not needed because of the rules labeled
> > 'Vonage' and 'Broadvoice'. In any case they will not match any packets
> > - see next point.
> >  "Interface Wan Proto any Source port 20001-65535 Dest port
> > 20001-65535" will match a packet coming in on the WAN interface that
> > has source port of 20001-65535 AND destination port of 20001-65535.
> > This is unlikely to happen.
> > Just specify the destination ports and leave source as 'any' that should
> > work.
> > sai