SAI, I have changed the SRC to ANY and using ONLY DST.
workes good so far.
On 10/25/05, sai <sonicsai at gmail dot com> wrote:
> On 10/25/05, YARICK <yarick at yarick dot com> wrote:
> > Ladies and Gents,
> > after further analyzing the situation I have noticed that my traffic
> > optimization rules do not really seem to identify traffic with the rules
> > protocols 1-9999 ports. Why is that ?
> > The rule that works is the one where the packets identified by SRC/DST
> > address.
> > Please see screenshots below.
> > --Yarick
> Yarick, I have already mentioned the reason for this -
> > rules like
> > LAN TCP * Port: 443 (HTTPS) * Port: 443 (HTTPS) Pipe 2
> > are incorrect. If you are trying to prioritise HTTPS traffic
> > from the LAN network then the source port will also be
> > * (not 443).
> To clarify => just specify the destination port - you almost never
> want to specify the source port. The source port should almost always
> be ANY.
> Also I suggest that you stop using direction - keep direction as ANY.
> You are using ip address and destination port so dont need the