I believe this has been discussed earlier.
The outcome was ... to create two monowall boxes(one for cable and one for
dsl)
And configure two default gataways on the internal network workstations.

--Yarick

On 10/28/05, googl3meister <googl3meister at gmail dot com> wrote:
>
> Pieterjan Heyse wrote:
> > Hello m0n0wall dudes&dudettes,
> >
> > I would like to have some advice on my new m0n0wall setup.
> >
> > LAN2(opt1)
> > |
> > |-------------|---CABLE WAN (wan)
> > LAN1(lan)---| M0N0 |
> > |-------------|---SDSL WAN (opt3)
> > |
> > DMZ(opt2)
> >
> > I have 2 internet connections, one I will use for browsing the
> > internet & general purpose, the SDSL connection will be used for
> > hosting services.
> >
> > Is it possible configure m0n0 in such a way that LAN1&2 use the CABLE
> > for default GW and the DMZ uses SDSL as a default GW ?
> >
>
> As you are aware, m0n0 cannot do this currently. But you might like to
> look into pfsense (some might call it m0n0's big brother), as it
> supports multiple WAN connections provided one of them is static IP or
> DHCP, which should/might work for you on your cable connection? (Set up
> the SDSL as pppoe and you should be away).
>
> FAQ entry to set up mult. WAN links
>
> http://faq.pfsense.org/index.php?sid=4129&lang=en&action=artikel&cat=6&id=18&artlang=en
>
> pfsense has a gateway option for each interface so routing should not be
> an issue.
>
> You'll note that the author of the above should be familiar to you from
> this list :)
>
> --
> Rgds
> gm
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.362 / Virus Database: 267.12.5/150 - Release Date: 27/10/2005
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>