Ah, the gateway! I forgot to change the gateway on the server. It was still pointing to my old
Zyxell router. Dude, thanks!
a certified industry figure since 1996
From: Claudio Castro [mailto:ccastro at unr dot edu dot ar]
Sent: Friday, November 04, 2005 2:57 PM
To: Jeff Lorenzini
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] Beginnger question
Welcome to the club ;)
Check if from the LAN interface of the m0n0 box you can acces the
internet , do that from the administation web page of m0n0, in the
Diagnosis tab -> Ping.
Check the agteway of yor server, it must be the LAN interface of m0n0
Check the logs of m0n0 to see if something is blocking the traffic.
Jeff Lorenzini wrote:
> I hate to ask such a simple question, but I've been playing around with
> monowall for quite a while and I don't seem to understand something.
> I have a server with a static IP on the LAN, and it maps 1:1 to a WAN
> 192.168.0.135 -> 188.8.131.52
> The problem is I can't access the internet from this server. I set up a
> 1:1 NAT entry:
> Interface: WAN
> External subnet: 65.204.288.188.135/32
> Internal Subnet: 192.168.0.135
> Then I set up a firewall rule under the LAN tab:
> Source/Port: 192.168.0.135/*
> Destination/Port: *
> But I can't access the internet. What am I missing?
> _/eff lorenzini
> a certified industry figure since 1996
A.U.S. Claudio O. Castro
Dirección Informática Universitaria
Sede de Gobierno - U.N.R.
Maipu 1065 - Oficina 206
(341) 420-1246 - Int: 205