[ previous ] [ next ] [ threads ]
 
 From:  "BCW" <santana110 at telstra dot com>
 To:  "'RP Smith'" <rpsmith at hotmail dot com>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Multiple External WAN IP to Internal LAN IP
 Date:  Mon, 7 Nov 2005 22:21:17 +1100
Hi Roy,

Thanks for the info.  

But unfortunately, none of the method works.  

If you do have any others ideas, please let me know!!!

Bill

-----Original Message-----
From: RP Smith [mailto:rpsmith at hotmail dot com] 
Sent: Tuesday, 1 November 2005 5:57 PM
To: m0n0wall at lists dot m0n0 dot ch
Cc: santana110 at telstra dot com
Subject: RE: [m0n0wall] Multiple External WAN IP to Internal LAN IP

Bill,

Add your second external (global) IP to your "Proxy ARP" table, then add the
same IP to the "Server NAT" or "1:1 NAT". If you used "Server NAT", you will
need to add NAT entries to forward ports from the external address above to
the correct LAN (private) IP and also add/auto-add the corresponding WAN
rule.  If you chose "1:1 NAT", skip the NAT entry (all ports are
automatically forwarded to the LAN address you specified) and just add WAN
rules for the ports you want to allow in.  Hope that helps.

Roy...

>From: "BCW" <santana110 at telstra dot com>
>To: <m0n0wall at lists dot m0n0 dot ch>
>Subject: [m0n0wall] Multiple External WAN IP to Internal LAN IP
>Date: Tue, 1 Nov 2005 16:50:19 +1100
>
>
>Hi Guys,
>
>You might be tired of this issue.  After I read through the Docoumentation.
>I am still couldn't get this problem to work.
>
>I only have 2 Network Card in the m0n0wall, and I am attempt to add an 
>extra or multiple WAN IP to the m0n0wall and to allow traffic to the 
>LAN IP (such as HTTP, FTP, and etc).  After I read through all the 
>different scenarios from the mailing list archives, none of those works 
>on me.
>
>Does anyone have a step by step guide on how to do this???
>
>Bill
>
>
>