Does it work when the soekris is posting, do you see its bios go by.
You need to be more descriptive of how you are doing things and what
results you are getting or you wont get any good feedback.

-----Original Message-----
From: bimbo [mailto:samba at legnago dot org] 
Sent: Wednesday, November 09, 2005 4:01 PM
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] serial and net4501

Josh Simoneau ha scritto:

> In the past, m0n0wall operated at 9600 out of the box. Many embedded
> systems, such as the Soekris boards, came set to 19200. So, you could
> either set the Soekris board to 9600 in bios for them to match, or set
> your terminal program speed to whatever function you needed to use.
Set
> it to 19200 if you need access to the board bios functions, set it to
> 9600 if you want to work with m0n0wall.
> 
> Now, though, it seems that m0n0wall adapts to the console speed of the
> hardware. So check the settings for the board, and use that.

Soekris net4501's manual say that board works with 19200, monowall's doc
too.
Some documents found on google ... 9600
Connection to serial port doesn't work with 19200 an 9600.
Hyperterminal screen remains blank.
Any ideas?

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch