[ previous ] [ next ] [ threads ]
 
 From:  "James W. McKeand" <james at mckeand dot biz>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] serial and net4501
 Date:  Wed, 9 Nov 2005 15:49:24 -0600
bimbo wrote:
> Josh Simoneau ha scritto:
> 
>> In the past, m0n0wall operated at 9600 out of the box. Many embedded
>> systems, such as the Soekris boards, came set to 19200. So, you could
>> either set the Soekris board to 9600 in bios for them to match, or
>> set your terminal program speed to whatever function you needed to
>> use. Set it to 19200 if you need access to the board bios functions,
>> set it to 9600 if you want to work with m0n0wall.
>> 
>> Now, though, it seems that m0n0wall adapts to the console speed of
>> the hardware. So check the settings for the board, and use that.
> 
> Soekris net4501's manual say that board works with 19200, monowall's
> doc too.
> Some documents found on google ... 9600
> Connection to serial port doesn't work with 19200 an 9600.
> Hyperterminal screen remains blank.
> Any ideas?

Are you sure the com port on the PC is working? Also, are you using the
right com port on the PC - If HyperTerminal is listening to com1 and the
net4501 is talking to com2...

_________________________________
James W. McKeand