[ previous ] [ next ] [ threads ]
 
 From:  sai <sonicsai at gmail dot com>
 To:  Jonathan De Graeve <Jonathan dot De dot Graeve at imelda dot be>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: Dynamic Routing images
 Date:  Fri, 11 Nov 2005 16:29:32 +0500
Jonathan,
whats the performance like? How much memory does it take?
I'd like to test but dont have the setup for multiple WAN....

sai

On 11/7/05, Jonathan De Graeve <Jonathan dot De dot Graeve at imelda dot be> wrote:
> I played this weekend with dynamic routing on m0n0wall.
>
> I thought: lets put the whole thing online so others can play with it
> too :)
>
> Its basically an adapted version of the radius2 images with support for:
>
> RIP,OSPF,BGP,ISIS
>
> At this point you only can configure the stuff from the console (option
> 7)
> Also the configuration isn't saved, so if you reboot you will lose it.
>
> You can put an base64 encoded Quagga.conf into your config and the
> system will write it out on bootup. You manually have to start the
> daemons you need.
>
> Config example:
>
> <m0n0wall>
> <router>
> 	</enable>
> 	<config>base64encoded_quagga_conf_in_here</config>
> </router>
> </m0n0wall>
>
> The place to be:
>
> http://inf.imelda.be/downloads/m0n0wall/m0n0router/
>
>
>
> J.
>
> --
> Jonathan De Graeve
> Network/System Administrator
> Imelda vzw
> Informatica Dienst
> 015/50.52.98
> jonathan dot de dot graeve at imelda dot be
>
> ---------
> Always read the manual for the correct way to do things because the
> number of incorrect ways to do things is almost infinite
> ---------
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>