Hi Chris

I thought that would be the case so I posted another message titled 
"IPSEC VPN and Routing Networks".

Could you take a look at that post and advise?

Thanks

Mark

Christopher M. Iarocci wrote:

> Mark,
>
> What you're looking to do is set up an IPSEC VPN, not static routes.  
> That is how you will accomplish what you are trying to do.  You can 
> not route 192.168.x.x private addresses over the internet without the 
> benefit of a VPN tunnel.
>
> Chris
>
>
> Mark Wass wrote:
>
>> Hi All
>>
>> I have a routing question. Can I route a network on my OPT1 interface 
>> from one m0n0wall box over the internet to another m0n0wall box. See 
>> diagram below.
>>
>>
>>       OPT1 192.168.3.0/24
>>                |
>>                |
>>                |
>>                |OPT1 = 192.168.3.1/24
>>             m0n0wall#1
>>                |WAN = 203.xxx.xxx.1
>>                |
>>                | [Internet - many hops between]
>>                |
>>                |WAN = 204.xxx.xxx.30                   m0n0wall#2
>>                |OPT1 = 192.168.4.1/24
>>                |
>>                |
>>                |
>>       OPT1 192.168.4.0/24
>>
>> If I wanted a server at the address 192.168.3.2 to connect to a 
>> server (say via ssh) 192.168.4.2 could I put a static route on 
>> m0n0wall#1 like this.
>>
>> Interface   Network            Gateway
>> WAN         192.168.4.0/24     204.xxx.xxx.30
>>
>> Thanks
>> Mark
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>