Yeah, different kernel and larger image AND The flashmedia actually has
to be > 16MB to host the image

I asked the latest kernel to Manuel (p13) so that I have exactly the
same one.

J.

-- 
Jonathan De Graeve
Network/System Administrator
Imelda vzw
Informatica Dienst
015/50.52.98
jonathan dot de dot graeve at imelda dot be

---------
Always read the manual for the correct way to do things because the
number of incorrect ways to do things is almost infinite
---------
-----Oorspronkelijk bericht-----
Van: Lee Sharp [mailto:leesharp at hal dash pc dot org] 
Verzonden: maandag 28 november 2005 19:48
Aan: m0n0wall
Onderwerp: [m0n0wall] Odd error applying custom images

I discovered a problem while trying to apply one of the fantastic Radius

images from Jonathan De Graeve.  I doubt it is this image, but I am
giving 
all data.  I was using the CF IDE part from 
http://ec.transcendusa.com/product/ItemDetail.asp?ItemID=TS16MDOM40V  If
I 
would flash the 1.2 stable, I had no problems.  Using physdiskwrite to
flash 
two different images from Jonathan (16-35 and 23-23) it would fail with 
"16252928 bytes writtenWrite error after 16252928 bytes (8192)." If I 
attempted a firmware upgrade from 1.2 stable to either radius image, on 
reboot, it would not find the config.xml, and sleep.  When flashed to a 
standard IDE hard drive (Fujitsu 4 gig) everything was fine.  This
failure 
is repeatable with different (same type, but 5 different ones) CF IDE 
drives, and different images from Jonathan.  It's sucess is repeatable
with 
1.2 stable and 1.11 stable on all of the CF IDE drives.  Any thoughts?

                        Lee 


---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch