Read somewhere that the command on linux is
dd bs=16k if=image-file of=/dev/harddrive-to-install-image



-----Original Message-----
From: Mathias Burén [mailto:mathias dot buren at gmail dot com]
Sent: Wednesday, November 30, 2005 8:44 AM
To: Paul Fournier
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] Installing m0n0 from linux

Use the dd command. I don't think that my example will work, because I
think you need to set the block size and such (see man dd). But, it's
basically dd if=m0n0wall-image of=/dev/theharddrive .

Regards, Mathias

2005/11/30, Paul Fournier <august70 at thefourniers dot net>:
> Can someone tell me how I can install the image onto a disk from a running
> linux box.
> I have a running linux box and a drive that will be the going into the
> m0n0wall box, I would like to know
> How from linux I can put the image on the second drive and if I need to
use
> fdisk to create a partition and drive type.  TIA
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch