[ previous ] [ next ] [ threads ]
 
 From:  "Adam Armstrong" <adama dash lists at memetic dot org>
 To:  "'Paul Fournier'" <august70 at thefourniers dot net>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] VLANs and m0n0wall
 Date:  Fri, 2 Dec 2005 10:35:10 -0000
Also, have you made sure the Cat5k is using the correct encapsulation for
the vlan frames? If it's defaulting to ISL that might cause some problems,
but without breaking the native vlan!

adam.

> -----Original Message-----
> From: Paul Fournier [mailto:august70 at thefourniers dot net]
> Sent: 01 December 2005 04:28
> To: m0n0wall at lists dot m0n0 dot ch
> Subject: [m0n0wall] VLANs and m0n0wall
> 
> OK YES I have RTFM!
> So let me continue....
> 
> Network set up is thus.
> 
> Cisco router
> Se0/0 x.x.x.x
> Fe0/0 x.x.x.113
> 
> m0n0wall
> Fxp0 Public IP
> Fxp1   10.200.1.1
> 
> Cisco 5000
> Router card 10.200.1.2
> Sup Card 10.200.1.3
> 
> Vlans
> Vlan 1  10.200.1.2/24
> Vlan 20 10.200.2.2/24
> Vlan 30 10.200.3.2/24
> Vlan 40 10.200.4.2/24
> Vlan 50 10.200.5.2/24
> Vlan 60 10.200.6.2/24
> Vlan 70 10.200.7.2/24
> 
> Internal routing on the switch works fine between the vlans!
> Machines on vlan 1 can get out without problem!
> 
> Machines on other vlans can not!
> 
> I have tried setting up VID's and assigned IP's to each
> VID(10.200.2.1,etc,etc,etc) and added rules to allow access to to
> internet,
> but they all fail.
> 
> What is the best(fool proof method of getting all of these to work?)
> HELP...
> Config example? I had it working fine with the Chitco Pix Firewall, but
> really want to use m0n0!
> 
> TIA
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch