[ previous ] [ next ] [ threads ]
 
 From:  Chris Buechler <cbuechler at gmail dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Driver for Intel NIC
 Date:  Fri, 2 Dec 2005 10:40:23 -0500
On 12/2/05, Don Munyak <don dot munyak at gmail dot com> wrote:
> >> What I need to know is which is the driver for Intel Pro 100S NIC?
>
> http://www.freebsd.org/releases/4.11R/hardware-i386.html#ETHERNET
>
> I beleive it is (fxp4)
>

yup, should just be able to change them to fxp0, fxp1, and fxp2 in
your config, restore the config, power down, swap the NIC's, and power
up.

The trick might be knowing which NIC is which.  On a typical ATX form
factor board, the card closest to the PS/2, serial, USB, etc. ports
will be fxp0, the next closest one fxp1, and the furthest fxp2.  If
you have a weird motherboard, that might be different.

-Chris