[ previous ] [ next ] [ threads ]
 
 From:  Stephen Fulton <sfulton at esoteric dot ca>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  High latency using MPD for multilink PPPoE.
 Date:  Sun, 04 Dec 2005 20:47:56 -0500
Hi all,

I'm using m0n0wall, and I've configured MPD to do multilink, but I'm 
experiencing high latency using ping, around 1000ms, when I ping a Cisco 
2610 I've got connected to it for testing.  I'm using NAT, and the 
default firewall rules (so effectively none).  Here's my custom mpd.conf 
file -- am I missing something there?  Or would it be something else?

mpd.conf:

pppoe:
          new -i ng0 pppoe pppoe pppoe2
          set iface route default
          set iface disable on-demand
          set iface idle 0
          set iface up-script /usr/local/sbin/ppp-linkup
          set bundle enable multilink
          set bundle authname "test1"
          set bundle password "test"
          set link keep-alive 10 60
          set link max-redial 0
          set link no acfcomp protocomp
          set link disable pap chap
          set link accept pap
          set link mtu 1492
          set ipcp yes vjcomp
          set ipcp ranges 0.0.0.0/0 0.0.0.0/0
          open iface

mpd.links:

pppoe:
          set link type pppoe
          set pppoe iface sis1
          set pppoe service ""
          set pppoe enable originate
          set pppoe disable incoming

pppoe2:
          set link type pppoe
         set pppoe iface sis2
          set pppoe service ""
          set pppoe enable originate
          set pppoe disable incoming

Thanks!

-- Stephen.