[ previous ] [ next ] [ threads ]
 
 From:  "Jonathan De Graeve" <Jonathan dot De dot Graeve at imelda dot be>
 To:  "Koen Wastyn" <koen dot wastyn at samuraiatwork dot com>
 Cc:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Soekris net 48XX does not boot
 Date:  Wed, 14 Dec 2005 13:18:33 +0100
Hdc1 is a partition
Hdc is a disk

J.

-- 
Jonathan De Graeve
Network/System Administrator
Imelda vzw
Informatica Dienst
015/50.52.98
jonathan dot de dot graeve at imelda dot be

---------
Always read the manual for the correct way to do things because the
number of incorrect ways to do things is almost infinite
---------
-----Oorspronkelijk bericht-----
Van: Koen Wastyn [mailto:koen dot wastyn at samuraiatwork dot com] 
Verzonden: woensdag 14 december 2005 13:18
Aan: Manuel Kasper
CC: m0n0wall at lists dot m0n0 dot ch
Onderwerp: Re: [m0n0wall] Soekris net 48XX does not boot

Hi Manuel


This works great, thank you so much for helping me, I appreciate it!
But i do not understand the solution, so if I use hdc1 I will format the
CF
for MS dos use, just /hdc  is for unix, is that right? (just trying to
learn
something here :-)

Thanks again!

Kind regards,
Koen




On 14-12-2005 13:08, "Manuel Kasper" <mk at neon1 dot net> wrote:

> On 14.12.05 11:18 +0100, Koen Wastyn wrote:
> 
>> 3 On the zaurus:
>>     mkfs.ext2 /dev/hdc1     (hdc1=CF)
> 
> No need for that.
> 
>> 5. gunzip -c net48xx-1.2.img | dd of=/dev/hdc1 bs=16k
> 
> You need to write the image to /dev/hdc, not hdc1. m0n0wall doesn't
> use DOS-style partition tables.
> 
> - Manuel
> 
> 



---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch