[ previous ] [ next ] [ threads ]
 
 From:  Ervin Malicdem <schadow1 at gmail dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Wireless AP recommendations
 Date:  Thu, 15 Dec 2005 21:26:57 +0800
OK. problem solved. I have tried hyperwrt+tofu11 firmware and worked well
with 1.2 final.

On 12/15/05, Ervin Malicdem <schadow1 at gmail dot com> wrote:
>
> Hi Josh,
>
> I've been reading your post about WRT54G and yes we indeed have issues
> with Talisman and m0n0wall's captive portal. I've also seen your post that
> you have a perfectly working WRT54G m0n0wall setup.
>
> My question is, is your WRT54G on factory firmware?
>
> My current setup is a WRT54G v3.1 with Talisman (Freeman version) 1.04firmware.
>
> Thanks!
>
>
>
> On 12/15/05, Josh Hyles <josh dot maillists at gmail dot com> wrote:
> >
> > yup, however, the sveasoft talisman or whatever its called (I was
> > using the Freeman 1.04 hacked version) has serious issues with Captive
> > portal... I posted on here about it and got others to confirm the
> > problem. Try using like hyperWRT or something like that....
> >
> > http://www.linksysinfo.org
> >
> > Josh.
> >
> > On 12/14/05, Don Munyak <don dot munyak at gmail dot com> wrote:
> > > ---------- Forwarded message ----------
> > > From: Giobbi, Ryan <rgiobbi at agoc dot com>
> > > Date: Dec 14, 2005 8:11 AM
> > > Subject: RE: [m0n0wall] Wireless AP recommendations
> > > To: phil at sikosis dot com, m0n0wall at lists dot m0n0 dot ch
> > >
> > >
> > > > On most middle / higher-end AP's, you should be able to have control
> > > > over the radio's power output.
> > >
> > > In terms of power output, couldn't you just use a Linksys WRT54G with
> > > a third party firmware to boost the output ??
> > >
> > > ~ Don
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> > >
> > >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> >
> >
>