[ previous ] [ next ] [ threads ]
 
 From:  "Delpy" <delpy at sover dot net>
 To:  "Bart Smit" <bit at pipe dot nl>, <EXT dash Mike dot Bradshaw at nokia dot com>
 Cc:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] Bridging with 2 NICs possible in m0n0wall pb24?
 Date:  Thu, 15 Jan 2004 08:24:42 -0500
----- Original Message ----- 
From: "Bart Smit" <bit at pipe dot nl>
To: <EXT dash Mike dot Bradshaw at nokia dot com>
Cc: <m0n0wall at lists dot m0n0 dot ch>
Sent: Thursday, January 15, 2004 6:04 AM
Subject: Re: [m0n0wall] Bridging with 2 NICs possible in m0n0wall pb24?


>
> > is it possible with m0n0wall to perform packet shaping with only 2
> > NICs (LAN and WAN)?
>
> Yes.
>
> You do, however, need a third NIC to take up the role as LAN
> interface, but you leave it unused. Your network needs to be behind
> the DMZ (or first optional) interface. Bridge that interface with your
> WAN interface and you have what you want.

Isn't possible to do this between LAN  and OPT1. In this way, you'd have
access to the GUI on the LAN side and point the OPT1 interface at the
untrusted network. Seems to work for me but I want to make sure I'm not
missing something obvious.