[ previous ] [ next ] [ threads ]
 
 From:  eric at austinconventioncenter dot com
 To:  "Russell Ashdown" <russell at ashdown dot net dot au>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] hard drive install
 Date:  Fri, 16 Dec 2005 11:45:52 -0600 (CST)
> see: <http://m0n0.ch/wall/installation_generic.php>
>
> I have a modified install which uses an image burned onto a cdrom:
>
> 1. Download the tomsrtbt single floppy disk linux version from
> <http://www.toms.net/rb/>.
> 2. Install it on a floppy.
> 3. Boot from the floppy with the command: bz2bzImage ramdisk_size=10000
> as the boot parameter.
> 4. Make sure there is a mount point (/mnt/cdrom) if not, make one.
> 5. Insert a cd with the latest generic-pc-xxx.img m0n0wall image burned
> onto it.
> 6. Mount the cd: mount /dev/hdX /mnt/cdrom
> 7. Issue the following command from the linux command line:
> % gunzip -c /mnt/cdrom/generic-pc-xxx.img | dd of=/dev/hdX bs=16k
>

>
Thanks,

I used the M0n0wall liveinstaller CD and it worked like a champ