[ previous ] [ next ] [ threads ]
 
 From:  Raylund Lai <raylund dot lai at kankanwoo dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] PPOE Supported ?
 Date:  Fri, 16 Dec 2005 14:51:14 -0500
may be he's using 10mb nic for wan and opt?  -raylund

taharka wrote:

>How do,
>
>On Thu, 2005-12-15 at 23:00 -0500, Jim wrote:
>  
>
>>taharka,
>>
>>Thanks for letting me know. I don't know why we can't get m0n0wall 
>>working on DSL ppoe here.
>>I have just now got it working with IPCOP ppoe same hardware and I am 
>>sending this e-mail
>>via the DSL connection. Working very well
>>    
>>
>
>I switched from IPCOP/Smoothwall to m0n0wall using the same hardware,
>with no problems at all. Still use both for dial-up as m0n0wall is for
>broadband only.
>
>  
>
>>I am using the Efficient Networks 5360 that only runs in bridge mode, 
>>tried Westell as well same symptom very very slow connection
>>    
>>
>
>Now that's interesting information. My ISP claims those two modems work
>on two different DSLAMS.
>
>  
>
>>anything else you care to share that could shed some light on this ? Who 
>>is your DSL provider ?
>>    
>>
>
>My DSL provider/ISP at the moment (soon to change hands again for the
>third time in ~4 yrs.)is Altell.
>
>  
>
>>Care to share the section of your config so I can compare. What version 
>>of m0nowall are you on ?
>>    
>>
>
>I'm running the same version/platform that you're running at the moment.
>I also use CDROM version 1.2b7.
>
>  
>
>>Thanks
>>
>>Jim
>>    
>>
>
>BTW, I reread your status.php posting & it looks like there is a problem
>with the NIC cards.
>
>  
>
>>fxp0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500
>>	options=40<POLLING>
>>	inet 192.168.225.254 netmask 0xffffff00 broadcast >192.168.225.255
>>	ether 00:d0:b7:a6:b4:e8
>>	media: Ethernet autoselect (100baseTX <full-duplex>)
>>	status: active
>>rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>>	options=40<POLLING>
>>	ether 00:e0:7d:b3:bf:5b
>>	media: Ethernet autoselect (10baseT/UTP)
>>	status: active
>>rl1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>>	options=40<POLLING>
>>	ether 00:e0:7d:b4:f5:e8
>>	media: Ethernet autoselect (10baseT/UTP)
>>	status: no carrier
>>    
>>
>
>If, rl0: is your WAN interface, it should be running (100baseTX
><full-duplex>) as is fxp0: Most likely the reason for the slow speed.
>
>taharka
>
>Lexington, Kentucky U.S.A.
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>  
>