[ previous ] [ next ] [ threads ]
 
 From:  taharka <res00vl8 at alltel dot net>
 To:  Jim <jwells at networksisp dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] PPOE Supported ?
 Date:  Fri, 16 Dec 2005 15:53:51 -0500
On Fri, 2005-12-16 at 15:10 -0500, Jim wrote:
> Actually the Efficient 5360 is only a 10MB device and the NIC is a 10/100 
> that is why the 10MB link
> 
> Thanks
> 
> Jim

The Efficient SpeedStream 5200 (which I'm using as we speak) is a 10mb
device also. However, the WAN nic connected to the SpeedStream's
ethernet port is running in 100baseTX full-duplex mode. See below, my
interface settings. Note, rl0:=LAN rl1:=WAN

rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	options=40<POLLING>
	inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
	ether 00:50:fc:c1:e2:e9
	media: Ethernet autoselect (10baseT/UTP)
	status: active
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	options=40<POLLING>
	ether 00:e0:29:9f:09:f1
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active

taharka

Lexington, Kentucky U.S.A.