Please read this faq http://doc.m0n0.ch/handbook/faq-lannat.html  -Raylund

James Griffioen wrote:
> For reason's not worth explaining, I would like to configure the monowall
> so that LAN clients can use the monowall's WAN address when trying to access
> a web server that is on the LAN.  External (Internet) hosts can already access
> the web server via the rules I entered for inbound NAT, but LAN clients can
> only seem to access the web server if they know its internal address.
>
> I cannot seem to find any combinations of rules and/or static routes that will
> allow TCP packets arriving on the LAN interface carrying the WAN interface's IP
> address as the destination address to be fowarded back to the web server on
> the LAN.  This used to work with the linksys router that I was using before
> I replaced the linksys with the monowall.
>
> Any help would be greatly appreciated.
>
> Jim
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>