[ previous ] [ next ] [ threads ]
 
 From:  Josh Hyles <josh dot maillists at gmail dot com>
 To:  Fegul <lureofthedarkside at gmail dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Vonage Issues
 Date:  Sat, 7 Jan 2006 14:34:57 -0500
I have the RT31P2 that my friend got with his service a while back.
What other routers work with vonage and how can you get them? maybe
this one is outdated and crappy?


On 1/7/06, Fegul <lureofthedarkside at gmail dot com> wrote:
> Thats strange, what kind of adapter do you have?  I have a Motorola
> adapter that for some reason will not work in front of my router (both
> m0n0wall and my D-link) but will work behind.
>
> On Sat, 07 Jan 2006 12:28:54 -0700, Josh Hyles <josh dot maillists at gmail dot com>
> wrote:
>
> > I cant be 100% certain I suppose, but I did fix the vonage router to
> > work and went to sleep last night but then it broke again by morning.
> > When I say fix, I mean... all i did was change the LAN ip address....
> > saved settings, and it rebooted. Note that I did reset the router
> > previously in my first attempt to fix the problem. Only after changing
> > settings did it work. But those settings should have no bearing on my
> > setup as nothing is plugged into the switch part of the router, its
> > mearly on the end of my opt1 interface. Captive portal is on, but I
> > have it on the passthrough list and its being given a static ip in the
> > dhcp server for that interface. I guess I could try putting it on the
> > LAN side of the m0n0wall, but I doubt that will change anything.
> >
> >
> >
> > On 1/7/06, Fegul <lureofthedarkside at gmail dot com> wrote:
> >> I currently use my Vonage adapter behind my m0n0wall box without issues
> >> or
> >> any port forwarding.  You're certain your ISP is stable during that
> >> moment?
> >>
> >> On Sat, 07 Jan 2006 12:18:50 -0700, Josh Hyles
> >> <josh dot maillists at gmail dot com>
> >> wrote:
> >>
> >> > I just moved in with a friend who is using vonage. So we ditched my
> >> > DSL and got a cable modem. I'm using m0n0wall 1.2 and have been for
> >> > quite a while. When i plug in the vonage router to my network, it
> >> > works fine for quite a while. After some time (not sure of the actual
> >> > time frame) the phone line light goes out meaning there is no more
> >> > connection to the vonage server. We now have the vonage router doing
> >> > all the dhcp/routing, and its working fine and has been for about 5
> >> > hours. I've read on here that there is no need to configure anything,
> >> > but I'm at a loss as to what my problem is. I did read on vonages
> >> > website that you need to have ports 10000-20000 forwarded to the
> >> > router? is that correct?
> >> >
> >> > Any other help/experience would be much appreciated.
> >> >
> >> > ---------------------------------------------------------------------
> >> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> >> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> >> >
> >>
> >>
> >>
> >> --
> >> When all else fails, duck.
> >>
>
>
>
> --
> When all else fails, duck.
>