[ previous ] [ next ] [ threads ]
 
 From:  Josh Hyles <josh dot maillists at gmail dot com>
 To:  Kevin Tollison <kevin at kwtassoc dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Vonage Issues
 Date:  Sun, 8 Jan 2006 16:06:08 -0500
Thanks for the info guys. Just wanted to make sure I wasnt doing
something wrong. I have moved my vonage router from my OPT1 interface
which had captive portal (I added it to the passthrough) to the LAN
side of my monowall, all seems to be fine. Vonage running for 18 hours
no problems.

Thanks.

Josh
On 1/8/06, Kevin Tollison <kevin at kwtassoc dot com> wrote:
> I have the Motorola Router ATA (2 lines active).  It is plugged into the WAN
> side of the ATA behind my m0n0wall (v1 thru 1.21) Soekris 4801.  I have had
> no issues for almost 1 1/2 years.  I have a Static DHCP set(not actually
> needed), NO ports forwarded, and NO traffic shaping, on a Cable modem (5MB
> down, 512kb up), also their is a D-Link At&T Router ATA (1 line active) on
> the same network (no issues with it).  Sounds like maybe a bad ATA.
>
> I have several clients using the Linksys non-router version.  They are fine
> boxes, but the router version seem to work just as well.
>
> Hope this helps
>
> --
> Kevin
>
> -----Original Message-----
> From: dasz [mailto:daszylstra at comcast dot net]
> Sent: Sunday, January 08, 2006 12:33 AM
> To: Josh Hyles
> Cc: m0n0wall at lists dot m0n0 dot ch
> Subject: Re: [m0n0wall] Vonage Issues
>
> I agree, I didn't like the option either - but if it made it work it would
> be a work around until something better was figured out . . .
>
> I've got the Linksys PAP2 . . . . . it was $60 at Best Buy with a $10 + $50
> rebate so it was free . . . I don't remember if the rebates were contingent
> on new service or not . . . .
>
> After I brought it home it took very little time to set it up . . I had
> service almost immediately after finishing the online activation . . . .
>
> David Z
>
> ----- Original Message -----
> From: "Josh Hyles" <josh dot maillists at gmail dot com>
> To: "dasz" <daszylstra at comcast dot net>
> Cc: <m0n0wall at lists dot m0n0 dot ch>
> Sent: Saturday, January 07, 2006 11:47 PM
> Subject: Re: [m0n0wall] Vonage Issues
>
>
> I thought about that. I dont like that setup though, its just not a
> clean one. I want to try and find a NON-gateway/router version for
> vonage if i can. What model do you use?
>
>
> On 1/7/06, dasz <daszylstra at comcast dot net> wrote:
> >
> > I use Vonage through Monowall on a Comcast cable modem . . . . . . I've
> > seen
> > no issues with service . . . . My current firewall rules allows all
> > traffic
> > from any LAN IP, with no external ports forwarded to inside IPs . . . . .
> > I
> > haven't fine-tuned any options yet on my home Monowall (i.e. mostly out of
> > the box config) . . . . .
> >
> > I use a non-gateway Linksys Vonage adapter . . . . and it pulls an IP by
> > DHCP . . . . .
> >
> > Maybe set up with the Vonage adapter directly on the cable modem, then DMZ
> > the Monowall for the inside network?  This would let the Vonage adapter
> > prioritize phone traffic instead of having Monowall do it . . . . . . not
> > sure if it's the best solution, but something to try . . . . . .
> >
> > David Z
> > ----- Original Message -----
> > From: "Josh Hyles" <josh dot maillists at gmail dot com>
> > Cc: <m0n0wall at lists dot m0n0 dot ch>
> > Sent: Saturday, January 07, 2006 2:18 PM
> > Subject: [m0n0wall] Vonage Issues
> >
> >
> > I just moved in with a friend who is using vonage. So we ditched my
> > DSL and got a cable modem. I'm using m0n0wall 1.2 and have been for
> > quite a while. When i plug in the vonage router to my network, it
> > works fine for quite a while. After some time (not sure of the actual
> > time frame) the phone line light goes out meaning there is no more
> > connection to the vonage server. We now have the vonage router doing
> > all the dhcp/routing, and its working fine and has been for about 5
> > hours. I've read on here that there is no need to configure anything,
> > but I'm at a loss as to what my problem is. I did read on vonages
> > website that you need to have ports 10000-20000 forwarded to the
> > router? is that correct?
> >
> > Any other help/experience would be much appreciated.
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.371 / Virus Database: 267.14.15/223 - Release Date: 1/6/2006
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>