[ previous ] [ next ] [ threads ]
 
 From:  Shaun Glaim <sglaim at gmail dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Help/suggestions on PPTP Server issue
 Date:  Wed, 18 Jan 2006 13:51:49 -0800
Hello All,

I have not had any success in getting clients connected to the PPTP service.

My goal is to have wireless 802.11b clients connect to the PPTP server
running on the M0N0Wall.  The client will be issued a IP address from
the PPTP client range.  Firewall rules would only allow those
connected via the PPTP service to access Servers connected to the WAN
Interface (An internal company network ).

My current configuration/topology:

I am using M0N0Wall v1.21 loaded on a WRAP platform.

The network setup is as follows:

(Internal Company Net) -10.x.x.x --WAN IF [ M0N0Wall ] LAN IF(192.168.1.1)

The M0N0Wall PPTP server service (192.168.1.254) is running on the LAN
interface.  The PPTP client range is 192.168.1.192/28 (as per current
documentation for M0N0Wall)

A 802.11b wireless AP is connected to the LAN IF at 192.168.1.20 IP address.

DHCP is provided by the M0N0Wall for the LAN IF (192.168.1.100 -->190)

Any suggestions as to configuration, rules or routing changes to
enable this configuration to work would be greatly appreciated.

sglaim

gmail.com