Glenn,

Does the BIOS for the PC see the card? It should recognize it as a 16MB
IDE device, just like a hard drive.

Regards,
Josh Simoneau 


-----Original Message-----
From: Glenn E. May [mailto:gmay at gemweb dot net] 
Sent: Wednesday, February 08, 2006 4:13 PM
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] Booting from CF

I have an older Compaq Presario PC..  I have an IDE <> CF card reader,
and a 16mb cf card in there..  I have written the img to the card.  When
I have it in the system to boot, I get a message that no boot device
exists.  I have tried all of the IDE ports, cable ports, and jumper
settings on the card..  no go..


If anyone has any ideas, or if I am missing something, any help would be
apreciated.

Thanks
Glenn

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch