[ previous ] [ next ] [ threads ]
 
 From:  Alex Neuman van der Hans <alex at nkpanama dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Booting from CF
 Date:  Wed, 08 Feb 2006 16:30:19 -0500
How did you write the image to the card? I seem to recall a few times 
getting ISO files on CD, PKUNZIP.ZIP, etc. - are you sure the CF card is 
properly formatted? Can you read it elsewhere? For example, if you can 
read it in DOS, it means it's not written properly.

Glenn E. May wrote:
> I have an older Compaq Presario PC..  I have an IDE <> CF card reader, 
> and a 16mb cf card in there..  I have written the img to the card.  
> When I have it in the system to boot, I get a message that no boot 
> device exists.  I have tried all of the IDE ports, cable ports, and 
> jumper settings on the card..  no go..
>
>
> If anyone has any ideas, or if I am missing something, any help would 
> be apreciated.
>
> Thanks
> Glenn
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch

-- 

Alex Neuman van der Hans
N&K Technology Consultants
Tel. +507 214-9002 - http://nkpanama.com/