[ previous ] [ next ] [ threads ]
 
 From:  "Jonathan De Graeve" <Jonathan dot De dot Graeve at imelda dot be>
 To:  "Jarkko Santala" <jarkko dot santala at portalify dot com>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Problem with booting m0n0wall from USB drive
 Date:  Sat, 11 Feb 2006 20:01:38 +0100
I have this working without any problem

J.

--
Jonathan De Graeve
Network/System Administrator
Imelda vzw
Informatica Dienst
015/50.52.98
Jonathan dot de dot graeve at imelda dot be

> -----Oorspronkelijk bericht-----
> Van: Jarkko Santala [mailto:jarkko dot santala at portalify dot com]
> Verzonden: zaterdag 11 februari 2006 19:52
> Aan: m0n0wall at lists dot m0n0 dot ch
> Onderwerp: [m0n0wall] Problem with booting m0n0wall from USB drive
> 
> Hi,
> 
> I'm going to implement a few firewalls using m0n0wall and I was
> thinking I'd use just an USB drive for storing both m0n0wall and the
> config.
> 
> However, after writing m0n0wall generic-pc-version into a USB drive
> (tried 1.21 and 1.2) I get this:
> 
> ---cut---
> Disk error 0xaa (lba=0x0)
> Disk error 0xaa (lba=0x0)
> No /boot/loader
> 
>  >> FreeBSD/i386 BOOT
> Default: 0:ad(0,a)/kernel
> boot:
> Disk error 0xaa (lba=0x0)
> No /kernel
> 
>  >> FreeBSD/i386 BOOT
> Default: 0:ad(0,a)/kernel
> boot:
> ---cut---
> 
> So it only goes looking for the loader (and kernel) in ad0 and not in
> da0 at all, which should be the USB stick. Does anyone have this
> working or good ideas on a solution?
> 
> 	-jake
> 
> --
> Jarkko Santala <jake at portalify dot com>    http://www.portalify.com
> System Administrator                   +358 40 720 4512
> 
> 
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
>