[ previous ] [ next ] [ threads ]
 
 From:  =?ISO-8859-1?Q?J=E9r=E9my_Cluzel?= <j dot cluzel at online dot fr>
 To:  m0n0wall at lists dot m0n0 dot ch, m0n0wall dash dev at lists dot m0n0 dot ch
 Subject:  WRAP version of m0n0 1.3a1
 Date:  Mon, 13 Feb 2006 03:05:59 +0100
Hello,

Does anyone has built a "WRAP" version of m0n0 1.3a1 ?
I tried to buid one, but I've this log when booting:

> (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-STABLE #1: Mon Jan 30 03:14:28 CET 2006
>    root at test dot localdomain dot local:/usr/src/sys/i386/compile/M0N0_WRAP
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Geode(TM) Integrated Processor by National Semi (266.64-MHz 
> 586-class CPU)
>  Origin = "Geode by NSC"  Id = 0x540  Stepping = 0
>  Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX>
> real memory  = 134217728 (128 MB)
> avail memory = 109379584 (104 MB)
> ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> cpu0 on motherboard
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x1000-0x10ff mem 
> 0x80000000-0x80000fff irq 10 at device 14.0 on pci0
> sis0: Silicon Revision: DP83816A
> miibus0: <MII bus> on sis0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> sis0: Ethernet address: 00:0d:b9:02:4f:ec
> sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0x1400-0x14ff mem 
> 0x80040000-0x80040fff irq 11 at device 16.0 on pci0
> sis1: Silicon Revision: DP83816A
> miibus1: <MII bus> on sis1
> ukphy1: <Generic IEEE 802.3u media interface> on miibus1
> ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> sis1: Ethernet address: 00:0d:b9:02:4f:ed
> Geode GPIO@ = f400
> Geode PC Engines WRAP.1C/1D/1E v1.tinyBIOS V1.4a (C)1997-2005
> isab0: <PCI-ISA bridge> port 0xf400-0xf43f,0xf600-0xf63f at device 
> 18.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <bridge> at device 18.1 (no driver attached)
> atapci0: <National Geode SC1100 ATA33 controller> port 
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 18.2 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pci0: <multimedia, audio> at device 18.3 (no driver attached)
> Geode CBA@ 0x9000
> Geode rev: 06 03
> Timecounter "Geode" frequency 27000000 Hz quality 1000
> pci0: <bridge> at device 18.5 (no driver attached)
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xe0000-0xe7fff on isa0
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
> sio0: type 16550A, console
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> RTC BIOS diagnostic error 80<clock_battery>
> Timecounters tick every 1.000 msec
> Fast IPsemd0: Preloc: Initialized Security Association Processing.
> IP Filter: v4.1.8 initialized.  Default = block all, Logging = enabled
> adead0: FAILURE - SETFEATURES SET TRANSFER MODE 
> status=51<READY,DSC,ERROR> error=4<ABORTED>
> ad0: 122MB <Hitachi XXM2.3.0 Rev 3.00> at ata0-master BIOSPIO
> d image </mfsroot> 16777216 bytes at 0xc06f1de8
> Trying to mount root from ufs:/dev/md0
> mkdir: /var/run: Read-only file system
> mkdir: /var/log: Read-only file system
> mkdir: /var/etc: Read-only file system
> mkdir: /var/db: Read-only file system
> clog: ERROR: could not open /var/log/system.log (No such file or 
> directory)
> clog: ERROR: could not open /var/log/filter.log (No such file or 
> directory)
> clog: ERROR: could not open /var/log/vpn.log (No such file or directory)
> clog: ERROR: could not open /var/log/portalauth.log (No such file or 
> directory)
> clog: ERROR: could not open /var/log/dhcpd.log (No such file or 
> directory)
> chmod: /var/log/*.log: No such file or directory
> cd: can't cd to /var/run
> ldconfig: mkstemp(/var/run/ld-elf.so.hints.rVN9Za): No such file or 
> directory
>
> Warning: touch(): Unable to create file /var/run/booting because No 
> such file or directory in /etc/rc.bootup on line 36
> Found configuration on ad0.
>
> Warning: fopen(/var/etc/cfdevice): failed to open stream: No such file 
> or directory in /etc/inc/config.inc on line 100
>
> Warning: fwrite(): supplied argument is not a valid stream resource in 
> /etc/inc/config.inc on line 101
>
> Warning: fclose(): supplied argument is not a valid stream resource in 
> /etc/inc/config.inc on line 102
>
> Warning: fopen(/etc/fstab): failed to open stream: Read-only file 
> system in /etc/inc/config.inc on line 105
>
> Warning: fwrite(): supplied argument is not a valid stream resource in 
> /etc/inc/config.inc on line 110
>
> Warning: fclose(): supplied argument is not a valid stream resource in 
> /etc/inc/config.inc on line 111
> XML configuration file not found. m0n0wall cannot continue booting.
> Waiting (max 60 seconds) for system process `vnlru' to stop...done
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
> Waiting (max 60 seconds) for system process `syncer' to stop...
> Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 0 done
> All buffers synced.
> Uptime: 27s
>
> The operating system has halted.
> Please press any key to reboot.

Any idea ?

Regards,

Jeremy