[ previous ] [ next ] [ threads ]
 From:  Claude Hecker <hecker at ifina dot de>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Problem with Remote Desktop
 Date:  Tue, 14 Feb 2006 21:30:54 +0100

we'r using NEO PC's with 1 GHz CPU, 256 RAM
and 3 Realtec NIC's at an average CPU load of
2% (sync 2 MBit WAN) -- so I think it is really
enough with your setup!


Kristian Shaw wrote:

> Hello,
> I once regularly got > 80mbs between subnets on a machine with 6 network 
> cards in it. Amazingly, it was only a PIII 500. Admittedly, this was not 
> on all the interfaces at the same time (although they were all busy) and 
> the network cards were Intel Pro/100s. Anyway, I expect that your 1.2 
> GHz machine will be fine for the sort of traffic you mentioned unless 
> you happen to have an amazingly fast connection to the Internet.
> Regards,
> Kris.
> ----- Original Message ----- From: "Ciaran Montgomery" 
> <ciaran dot montgomery at ntlworld dot com>
> To: <m0n0wall at lists dot m0n0 dot ch>
> Sent: Tuesday, February 14, 2006 7:54 PM
> Subject: RE: [m0n0wall] Problem with Remote Desktop
>> Came home with a fresh head after reading your posts, and tried it. My
>> problem was as Aaron has said, I did not specify any Inbound NAT, to tell
>> you the truth it never occurred to me!! Doh!
>> I can confirm that it is now working,
>> I appreciate your answers, has anyone any ideas on my hardware sizing,
>> should I just put it in place and see how the system responds?
>> Regards,
>> Ciaran
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch