[ previous ] [ next ] [ threads ]
 
 From:  "Brett Woodruff" <brett at skyways dot us>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] M0n0wall HostAP wicontrol set to 2mb?
 Date:  Mon, 20 Feb 2006 08:20:17 -0500
That would be 800kb/sec with a 9mb/1mb WAN connection

-----Original Message-----
From: Manuel Kasper [mailto:mk at neon1 dot net] 
Sent: Monday, February 20, 2006 8:12 AM
To: Brett Woodruff
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] M0n0wall HostAP wicontrol set to 2mb?

On 20.02.06 07:53 -0500, Brett Woodruff wrote:

> Hi, After doing some searching in the archives I found that HostAP
> is set to 2/MB here is a copy of what Status.php listed...
> 
> wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> 	inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
> 	ether 00:02:6f:3b:47:05
> 	media: IEEE 802.11 Wireless Ethernet <hostap> (DS/2Mbps <hostap>)

AFAIK in hostap mode the ifconfig speed setting doesn't matter, as it
may use different speeds for each client anyway. Someone correct me
if I'm wrong.

> With this I haven't been able to get more than about 800K/sec
> download speed rates.  Within the archives a command of:

Is that 800 kilobytes or bits per second?

> I haven't had the time this morning to test the rates on this node
> yet, but if it does improve the connection rates, I was wanting to
> know how I can permanently save these settings to the node, as to
> when I reboot the node it reverts back to it's original setting.

You could add that wicontrol command to config.xml (as a shellcmd
tag). See <http://doc.m0n0.ch/handbook/faq-hiddenopts.html>.

- Manuel

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch





-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.11/264 - Release Date: 2/17/2006