[ previous ] [ next ] [ threads ]
 From:  "Soren Vanggaard Jensen" <svanggaard at hotmail dot com>
 To:  leesharp at hal dash pc dot org, m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] m0n0wall] m0n0wall 1.2 stop responding.
 Date:  Tue, 21 Feb 2006 09:04:01 +0000
I used to have a lock-up problem. My monwall locked up every 1-2 days. The 
current uptime is however 70 days running monowall 1.2.

I believe that the reaoson for lockups should be found in trafficshaping 
ICMP. Try removing all ICMP trafficshaping rules. It did the trick in my 

Søren Vanggaard Jensen

>From: "Lee Sharp" <leesharp at hal dash pc dot org>
>To: <m0n0wall at lists dot m0n0 dot ch>
>Subject: Re: [m0n0wall] m0n0wall] m0n0wall 1.2 stop responding.
>Date: Mon, 20 Feb 2006 17:20:40 -0600
>From: "control alt del" <controlaltdel at control dash alt dash del dot net>
>>Some time ago, I send to list my problems with m0n0.
>>Last month, I change my m0n0wall box.
>>now I run m0n0 with a P III 733mhz with a asus cuvx4 board,
>>128mb ram and 3 intel pro 100 nics.
>>I run m0n0 with a hard drive.
>>Unfortenatly, the luckups continu to ocure, about 15 days of up time.
>>I run dnsforwarder, dhcp server, traffic shaper, and about 20 firewall
>>rules. My internet connection is PPPOE. when the luckup ocure the
>>box don't respond to keyboard.
>>In my opignion  the problem is an software issue, because the
>>hardware is completely diferent than I used.
>Capture and save a status.php page every day starting from a fresh reboot. 
>When you get the lockup, compare and see what is growing.  You could have 
>some dirty traffic on your LAN.  I had a client PC requesting DHCP every 8 
>seconds once.  Ran fine until I had a heavy load.  Then it got ugly quick.
>                        Lee
>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch