[ previous ] [ next ] [ threads ]
 
 From:  "Jason Collins" <jason at mammothcomputers dot com>
 To:  <simon dot vetterli at hotelplan dot ch>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] How to setup VPN correctly
 Date:  Sun, 26 Feb 2006 16:15:19 -0600
I am not sure I understand the problem -- are you saying that when you
connect to the pptp vpn from home to your workplace, you are then unable to
ping your local default gateway (the one at home) or anything else on your
home lan?  If so, it sounds like you are using the windows integrated pptp
vpn client.  You will need to edit its properties like this:

(Using XP)
Start
Settings
Network Connections
Right click connection in question
Properties
Networking
Select, "Internet Protocol TCP/IP"
Click Properties
Click Advanced
Remove checkmark from "Use default gateway on remote network"
Save changes accordingly
Try connection again.

Hope this helps,

Jason




-----Original Message-----
From: simon dot vetterli at hotelplan dot ch [mailto:simon dot vetterli at hotelplan dot ch] 
Sent: Thursday, February 23, 2006 4:21 AM
To: sonicsai at gmail dot com; m0n0wall at lists dot m0n0 dot ch
Subject: AW: [m0n0wall] How to setup VPN correctly

Hi

What I don't understand is the follow thing:

My problem is, when I connect from home over VPN, the I can't ping my
default Gateway! Even nothing else!

I have the follow config:

x enable PPTP-Server
Server address: 10.201.130.254
Remote-Adress range: 10.201.130.90 / 28

I'm not shure if this is right;

maybe it should be:

x enable PPTP-Server
Server address: 10.201.130.105
Remote-Adress range: 10.201.130.90 / 28


I defined my network as follow:

Defaultgateway: 10.201.130.1
Network 10.201.130.0/24
Netmask: 255.255.255.0

Type:			IP-Pool:
static		10.200.130.002 -10.201.130.029
Server/static	10.201.130.030 - 10.201.130.049
Printer/static	10.201.130.050 - 10.201.130.059
Client's /DHCP	10.201.130.060 - 10.201.130.089 (defined in DHCP-Servers)
VPN-Cli/DHCP	10.201.130.90 - 10.201.130.105 (defined in PPTP-Settings)
misc static		10.201.130.106 - 10.201.130.254

The I have only one firewall-rule (from PPTP-settings)!

I defined some static entries like:

switch01 10.201.130.2
server01 10.201.130.30
printer01 10.201.130.50

Maybe You see something wrong!

Kind Regards

Simon Vetterli
IC-Berater Informatik Hotelplan

Hotelplan AG
Internationale Reiseorganisation

CH-8152 Glattbrugg
Tel:	+41 43 211 79 56
Fax:	+41 43 222 96 14
mailto:simon dot vetterli at hotelplan dot ch
http://www.hotelplan.ch



Von: sai [mailto:sonicsai at gmail dot com]
Gesendet: Donnerstag, 23. Februar 2006 08:17
An: Vetterli, Simon
Cc: james at mckeand dot biz; m0n0wall at lists dot m0n0 dot ch
Betreff: Re: [m0n0wall] How to setup VPN correctly


On 2/23/06, simon dot vetterli at hotelplan dot ch <simon dot vetterli at hotelplan dot ch> wrote:
> Hi
>
> I'm looking for an tutorial, how to setup really the pptp part.
>
> Do I have to setup NAT and other things on my firewall?
>
> Kind Regards.
>
> Simon Vetterli

pptp docs:
http://doc.m0n0.ch/handbook/pptp.html

You do not need to setup NAT for PPTP.

sai