From: "Steve Johnson" <sjohnson at warpdriveonline dot com>
> Next, I set up a NAT rule to allow WAN traffic to access http on the DMZ
> web server. I confirmed that m0n0wall also created the firewall rule
> allowing the access. I modified the rule to log packets handled by this
> Not only can I not access the http server from the WAN interface, I'm
> not even seeing any inbound http in the log, Nothing, either passed or
> blocked. I'm seeing typical probing on ports 1025, 1026, 1027, 1029,
> 1433, but nothing inbound from the WAN in the lower range.
Is your m0n0wall web interface http or https? If http, it could be the
antilockout rule. Try changing m0n0wall to https and see if it works.