|
||||||||||
I checked and double checked that. The three MAC addresses are totally different. I also verified the IP address and again from the client when the DHCP lease is assigned has the IP address that I would expect as the gateway address. Thanks. --- Steven Marcotte <sdmarcotte at comcast dot net> wrote: > Make sure you don't have the same MAC address spoofed on another > interface. That caused me some problems. Also, you might check to see > if the interface has the ip address you expect. > > Good luck, > Steve > > > On Thu, 2006-03-23 at 16:37 -0800, Ryan Peterson wrote: > > Yes, I tried them all. I'm using fxp1 currently, the middle one so it takes the guess work > out. > > It's definitly the LAN port, beause when I connect a client to it the IP330 does give me a > DHCP > > address. I can then go through the console port and choose "PING" on the IP330 and type in the > > client that got the DHCP address and it does respond. But I still can not get to the GUI going > to > > 192.168.1.1, nor can I ping 192.168.1.1. > > > > Thanks. > > > > --- Ryan Wagoner <Ryan at wgnrs dot dynu dot com> wrote: > > > > > You sure you know which port is assigned to what. Going from left to right its fxp0, 1, 2 > > > respectively. > > > > > > When I installed mine I had it running on another machine, then I downloaded the config > file, > > > added the spoofmac and changed the interfaces to fxp0,1,2 and then uploaded the config file > > > through webgui to that machine. When it went to restart I pulled the compact flash card and > ide > > > adapter and stuck it in the ip330. Booted it up and it just worked. > > > > > > > > > -----Original Message----- > > > From: Ryan Peterson [mailto:OCRyan at yahoo dot com] > > > Sent: Thu 3/23/2006 2:50 PM > > > To: m0n0wall at lists dot m0n0 dot ch > > > Subject: [m0n0wall] IP330 WebGui not coming up, even with spoofmac > > > > > > I read through http://chrisbuechler.com/m0n0wall/nokia/ip110.html and > > > http://wiki.m0n0.ch/wikka.php?wakka=NokiaBoxesSpoofMac. > > > > > > I installed to flash (v. 1.21 - generic-pc image), booted the Nokia, assigned the interfaces > and > > > then rebooted. After I got the startup screen again, shutdown and edited the config.xml from > > > another FreeBSD box. I added the <spoofmac> entries in the config.xml file for the LAN, WAN > and > > > OPT1 interfaces. Reinstalled to the Nokia and started up. > > > > > > The webGui still does not come up. I'm able to get a DHCP lease assignment, I can ping the > > > client > > > FROM the IP330 console, but can't ping the IP330 from the client. > > > > > > Does anyone have an idea of anything else I can try? > > > > > > Thanks in advance, > > > > > > Ryan > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > > > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch > > > > |