Ok

I now what is wrong..... it works only with Swisscom, Sunrise and Orange 
  (in Switzerland) won't work but it looks like that they don't block 
anything....
I have contacted Sunrise and Orange and they will see what they could 
do. They didnt know that there is a problem with PPTP.....

regards

Andreas Ferrari wrote:
> It looks like that nobody has an idea what there could be wrong:-(
> I can make sure that the provider is not blocking any traffic!
> The rule is also there (i let pass everything for pptp)....
> But what means parameter negotiation failed??
> 
>  > Mar 31 14:14:43     mpd: [pt0] LCP: LayerFinish
>  > Mar 31 14:14:43     mpd: [pt0] LCP: parameter negotiation failed
>  > Mar 31 14:14:43     mpd: [pt0] LCP: LayerFinish
>  > Mar 31 14:14:43     mpd: [pt0] LCP: state change Req-Sent --> Stopped
> 
> regards..
> 
> Andreas
> 
> Andreas Ferrari wrote:
> 
>> I doublchecked everything and I have no idea or I'm too stupid to see 
>> whats going wrong. Here is the important part from the logfile:
>>
>> Mar 31 14:14:45     mpd: pptp0: killing connection with 1.2.3.4:10641
>> Mar 31 14:14:45     mpd: pptp0: ctrl connection closed by peer
>> Mar 31 14:14:43     mpd: [pt0] LCP: Down event
>> Mar 31 14:14:43     mpd: [pt0] link: DOWN event
>> Mar 31 14:14:43     mpd: [pt0] device is now in state DOWN
>> Mar 31 14:14:43     mpd: [pt0] device: DOWN event in state DOWN
>> Mar 31 14:14:43     mpd: [pt0] LCP: phase shift ESTABLISH --> DEAD
>> Mar 31 14:14:43     mpd: [pt0] LCP: state change Closed --> Initial
>> Mar 31 14:14:43     mpd: [pt0] LCP: Down event
>> Mar 31 14:14:43     mpd: [pt0] link: DOWN event
>> Mar 31 14:14:43     mpd: [pt0] device is now in state DOWN
>> Mar 31 14:14:43     mpd: [pt0] device: DOWN event in state CLOSING
>> Mar 31 14:14:43     mpd: [pt0] LCP: state change Stopped --> Closed
>> Mar 31 14:14:43     mpd: [pt0] LCP: Close event
>> Mar 31 14:14:43     mpd: [pt0] link: CLOSE event
>> Mar 31 14:14:43     mpd: [pt0] device is now in state CLOSING
>> Mar 31 14:14:43     mpd: [pt0] device: CLOSE event in state CLOSING
>> Mar 31 14:14:43     mpd: [pt0] closing link "pt0"...
>> Mar 31 14:14:43     mpd: [pt0] bundle: CLOSE event in state OPENED
>> Mar 31 14:14:43     mpd: [pt0] device is now in state CLOSING
>> Mar 31 14:14:43     mpd: [pt0] IFACE: Close event
>> Mar 31 14:14:43     mpd: pptp0: closing connection with 1.2.3.4:10641
>> Mar 31 14:14:43     mpd: [pt0] IFACE: Close event
>> Mar 31 14:14:43     mpd: [pt0] IPCP: LayerFinish
>> Mar 31 14:14:43     mpd: [pt0] IPCP: state change Starting --> Initial
>> Mar 31 14:14:43     mpd: [pt0] IPCP: Close event
>> Mar 31 14:14:43     mpd: [pt0] IFACE: Close event
>> Mar 31 14:14:43     mpd: [pt0] PPTP call terminated
>> Mar 31 14:14:43     mpd: pptp0-0: killing channel
>> Mar 31 14:14:43     mpd: pptp0-0: clearing call
>> Mar 31 14:14:43     mpd: [pt0] device: CLOSE event in state UP
>> Mar 31 14:14:43     mpd: [pt0] LCP: LayerFinish
>> Mar 31 14:14:43     mpd: [pt0] LCP: parameter negotiation failed
>> Mar 31 14:14:43     mpd: [pt0] LCP: LayerFinish
>> Mar 31 14:14:43     mpd: [pt0] LCP: state change Req-Sent --> Stopped
>> Mar 31 14:14:41     mpd: ENDPOINTDISC [802.1] 00 0d b9 02 76 2c
>> Mar 31 14:14:41     mpd: MP SHORTSEQ
>> Mar 31 14:14:41     mpd: MP MRRU 1600
>> Mar 31 14:14:41     mpd: AUTHPROTO CHAP MSOFTv2
>> Mar 31 14:14:41     mpd: MAGICNUM 286f3b32
>> Mar 31 14:14:41     mpd: MRU 1500
>> Mar 31 14:14:41     mpd: PROTOCOMP
>> Mar 31 14:14:41     mpd: ACFCOMP
>> Mar 31 14:14:41     mpd: [pt0] LCP: SendConfigReq #70
>> Mar 31 14:14:39     mpd: ENDPOINTDISC [802.1] 00 0d b9 02 76 2c
>> Mar 31 14:14:39     mpd: MP SHORTSEQ
>> Mar 31 14:14:39     mpd: MP MRRU 1600
>> Mar 31 14:14:39     mpd: AUTHPROTO CHAP MSOFTv2
>> Mar 31 14:14:39     mpd: MAGICNUM 286f3b32
>>
>> Andreas Ferrari wrote:
>>
>>> Thanks for the hints...
>>>
>>> Kai Dittmann wrote:
>>>
>>>> Andreas Ferrari schrieb:
>>>>
>>>>> Hello
>>>>>
>>>>> Does anyone have have experience with this kind of pptp?
>>>>> Yesterday I plyed a little bit arround, saw that the the connection 
>>>>> to the PPTP server (M0n0wall) could be established but on the 
>>>>> client side I get a connection closed by server:-(
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>     Works very well for me, Palm T|X + SEM K600i
>>>>     via UMTS here in .DE
>>>>
>>>>     PPtP Server Settings are default.
>>>>
>>>>     Are you sure, that your mobile Povider permits
>>>>     PPtP-Tunneling ?  (swisscom, orange ?)
>>>
>>>
>>>
>>> I will check this..
>>>
>>>>         The PPtP-ControlChannel (TCP/1723) may work, but
>>>>     what's about GRE Proto for the Tunnel after a
>>>>     successful authentication ?
>>>
>>>
>>>
>>> and this ....
>>>
>>>>
>>>>
>>>> cheers,
>>>> -k.
>>>>
>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>>>> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>>>>
>>>
>>>
>>
>>
> 
> 


-- 
STASOFT AG
P: +41 61 726 80 70
F: +41 61 726 80 79