[ previous ] [ next ] [ threads ]
 
 From:  Adam Gibson <agibson at ptm dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] VPN bug in 1.21
 Date:  Tue, 04 Apr 2006 16:15:25 -0400
Jonathan De Graeve wrote:
> I think it is already reported and will be fixed in the 1.22 release.
> 
> IIRC it was a bug in the ipsec-tools

I don't know about Jason, but the problem still exists with 1.22 for me. 
   When I back down to 1.2 IPSEC works just fine for extended periods.

Jason, did 1.22 fix your ipsec issue?

> 
> J.
> 
> -----Oorspronkelijk bericht-----
> Van: Jason King [mailto:jking at informs dot com] 
> Verzonden: donderdag 16 maart 2006 21:43
> Aan: m0n0wall at lists dot m0n0 dot ch
> Onderwerp: [m0n0wall] VPN bug in 1.21
> 
> I didn't get much of a response from this earlier so I've decided to 
> submit it again with a different subject.
> 
> ----------------------------------------------------------------------
> 
> I think I have found a bug in 1.21. I have been using 1.2 for a while 
> now. These are the points of interest.
> 
> I have 2 IPSec VPN connections connecting us to 4 different hosts. Both 
> of these tunnels work perfectly on 1.2. The only time these connections 
> go down is when there is some problem on the remote end, not with the 
> m0n0wall.
> 
> Having said that, I tried upgrading a month ago to 1.21 which was 
> running off of a PC. I switched the firewall that previous night and 
> started it up and tested connectivity, everything appeared to be fine 
> (didn't check the vpn connections). Came in the next morning and I was 
> getting complaints that users couldn't get to those remote hosts through
> 
> the IPSec VPN tunnel. So I checked the tunnels. One of the tunnels was 
> up, but one was not. I called the remote host admins and asked what 
> could be wrong. They told me nothing changed on their side and so since 
> the only thing I changed was from 1.2 to 1.21 I decided it must be me.
> 
> Anyway, I took down 1.21 and put the 1.2 back in place. Both VPN tunnels
> 
> came up just fine and people continued to working.
> 
> I recently got approved for a soekris net4801 with the vpn1411 addon 
> board (joy). I decided I would try the net48xx version of 1.21 and see 
> if that made a difference. It was no different. This time I tested the 
> VPN connections before I left and discovered that the same problem as 
> before was still there. So I had to flash my CF card with 1.2 instead of
> 
> 1.21 and bring the soekris up with 1.2. There again, both VPN tunnels 
> came up fine.
> 
> I'm not even sure where to start looking for a solution to this problem 
> I'm seeing. Not really sure if it IS a problem but something has 
> definitly changed between 1.2 and 1.21 that breaks my VPN tunnels.
> 
> Just wanted to let everyone know what I found. I'm not looking for a 
> solution so much as I wanted the list to know about the problem. I'm 
> perfectly fine with 1.2.
> 
> m0n0wall ROCKS!
> 
> Jason
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
> 
> 
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>